News

December 5, 2016

Modernization of the UVB-2 unit (20 m³/h) reduced the set up time

GlobeCore anticipates the needs and preferences of its customers – by producing new equipment and upgrading the existing ones. The latest achievement is– an upgrade of bitumen modification plant UMBP-22.

Despite the cost of modified bitumen being more expensive than the cost of usual bitumen its use is practical for the following reasons:

temperature resistance of road surface; resistance to cracking of road surface; reduce surface loads; considerable life extension of...

November 5, 2016

GlobeCore at the International Bitumen Technology Conference in Sri Lanka

GlobeCore representatives took part in the 8th “Bitumen & Asphalt Conference & Exhibition” international conference in Sri Lanka on 1-3 November.

Here is a brief photo report from the conference.

...

November 5, 2016

The RBE-0.2 mobile bitumen emulsion sprayer unit is a new model for product range expansion

GlobeCore is delighted to inform of yet another expansion of products.

From today representatives of road works companies can purchase RBE-0,2 bitumen sprayers. This bitumen spraying equipment is designed for covering surface with bitumen emulsion by spraying it during asphalt repairs and maintenance of sections of small road and other objects of road facilities. In particular RBE 0,2 is indispensable at construction and repairs of parking zones,...


June 14, 2016

Upgraded Design of Modified Bitumen Storage Tank SBM-15

Very important among bitumen equipment are modified bitumen storage tanks. At the requests of customers GlobeCore engineering department upgraded the existing design of modified bitumen storage tank SBM-15.

In particular a new structural design of a storage tank with downwards pointing cone bottom solves the problem of heat loss in the bottom part. Hollow part now has a heat insulation 200 mm thickness minimum.

The new...


May 5, 2016

Commissioning bitumen emulsion equipment in Zimbabwe

28 April 2016 Zimbabwe’s Bitumen Emulsions Production Plant started its work with an opening ceremony.

The symbolic start was made by Transport and Infrastructure Minister Dr Joram Gumbo, who cut the ceremonial ribbon.

For GlobeCore this event was significant because the new facility is based on the GlobeCore UVB-1 plant. Other auxiliary units were manufactured locally. The total cost of this project is estimated at $...


April 8, 2016

In Houston opened a new service center of GlobeCore

Dear colleagues, partners and friends! We are pleased to inform you that from now – GlobeCore service support and equipment maintenance, become more accessible and interactive.

A new service center of our company opened in US.

New office address is: 1750-H Dickinson Ave (FM 1266) Dickinson, TX, 77539.

Contact numbers: + 1-713-429-1616 and + 1-713-828-7877.

Addresses of other offices and service centers are available in the section “Contacts”.

...

February 12, 2016

A UVB-1 unit for the road industry of Ghana

GlobeCore provides customer support during design and production of equipment, and also during its operation.

GlobeCore staff periodically visits units in operation to monitor their condition and share experience. At the beginning of 2016, the choice fell on Ghana.

Transport infrastructure of Ghana is represented by railways with total length of 1300 km, and roads 39.41 thousand km in length, out of which 11,67 thousand km...


December 10, 2015

Presentation of GlobeCore equipment took place in Bulgaria

In October 8-24, 2015 several cities of Bulgaria were the place of presentation of bitumen emulsion equipment produced by GlobeCore.

In particular, the representatives of our company visited Varna, Plovdiv, Ruse and Blagoevgrad. Need to note that this is not the first cooperation of GlobeCore with Bulgarian colleagues. Seven years ago the plant UVB-2 with capacity 10 m3/hour was commissioned in Varna. This equipment successfully works to the present day.

In these...


August 13, 2015

Equipment Commissioning In Azerbaijan

In February 2015, in Baku (Azerbaijan), GlobeCore representatives commissioned the UVB-1 unit with a capacity of 2 m3/h.  

This equipment is designed to produce cationic and anionic bitumen emulsions that fully meet the worldwide quality standards.

Nowadays, much preference is given to bitumen emulsions rather than hot bitumen when performing road construction and repairing works. It is due to the fact that bitumen emulsions provide better quality of road pavement, increase...


December 29, 2014

The New GlobeCore UVB-2 for the Preparation of Modified Bitumen Launched

On May 6, 2014, GlobeCore successfully launched a new UVB-2 unit for the preparation of modified bitumen.

The GlobeCore UVB-2 unit is newly designed and is especially in high demand among companies specializing in the preparation of asphalt top layers, protective layers of cement coatings and mastics.  The GlobeCore UVB-2 allows for modification of bitumen by adding in special polymers, adhesive additives and plasticizers.

The use of modified bitumen in asphalt mixes...


December 19, 2014

The GlobeCore Office in the United Arab Emirates has Moved!

Dear clients! On 5 June 2014, our office in the UAE has moved to the new address:

Globecore FZE. The manufacturer of equipment for oil reclamation.

Al Jazeera Al Hamra, P.O. Box 31291,

RAKIA Business Centre 5, Building No. A4, Office No. 205,

Ras Al Khaimah, United Arab Emirates.

We welcome you for a visit.  As always, our managers will gladly speak with you and help you to select the optimal equipment and solutions to...


October 21, 2014

GlobeCore Makes a History: the First In Tanzania Bitumen Emulsion Plant Was Commissioned

At the beginning of October, 2014 in Dar es Salaam (the United republic of Tanzania) the bitumen emulsion plant was officially started up.

The ceremonial ribbon was cut by the representative of the Labour department – Hassan Matimbe (is in the center of the photo). And we are glad to inform that this plant was produced by GlobeCore.

This plant is able to produce 10000 liters of bitumen emulsion per...


June 16, 2014

The UVB Unit Was Successfully Started Up in Thailand

On June 10, 2014, GlobeCore representatives visited Thailand to commission a new GlobeCore UVB unit with a capacity of twenty cubic meters per hour (20 m3/h).

The new unit is designed to prepare the water phase of bitumen emulsion production.  When the pre-commissioning was successfully completed, GlobeCore engineers held a hands-on training to teach the staff how to service and maintain their new unit.

A bitumen emulsion water phase block consists of...


December 30, 2013

GlobeCore has increased the production facility floor by 8,000 square meters.

GlobeCore has increased the production facility floor by 8,000 square meters im this year.

...

обновлено: July 13, 2017 автором: globecore